#Read Me

Two Stage Operational Amplifier

--->WORKING WITH ESIM ,NGSPICE AND SKY130 MODELS

1.Go to esim click on new project ,give name file will be saved then click on open schematic window
2.Using place component ,place all necessary components for the circuit on to the schematic window.
4.Connecte all components using wires & annotate all the components using annotate option.
3.To verify errors in circuit electrical rules check option will help
4.Then generate netlist will generate spice file which will helful for ngspice circuit simulation.
5.In generated spice file add sky130 models by using its library which is available in sky130 folder and edit netlist accordingly,the generated netlist is of type .cir
6.Run the .cir file to get plots. 


--->TASK PERFORMANCE
1.Introduction to stages of esim marathon 
2.Followed VSD circuit simulation & DAC IP course provided by faculty
3.Joined slack and took help from peers and sirs
4.Researched about ngspice commands and Esim environment.
5.Analysed my circuit using reference circuit in research papers.
4.Debuged my circuit to get needed result
5.Intense process, detailed observation