CMOS Schmitt Trigger Design

Task Done:

1) As I am new to circuit design, first I have watched the Spoken tutorials to get familiar with the eSim tool. From there I learned how to a design circuit and simulate it.
   
2) After getting familiar with the eSim tool, I watched Kunal sir's circuit design and simulations course, form there I understood Mosfet's various regions of operation and its working 
   and also learned to write the SPICE deck and did some basic SPICE simulation.

3) Then as we have to design our circuits using SKY130 technology I researched about it.

4) After that, I watched the next course i.e 10-bit DAC design using eSim and sky130. I designed the circuit using eSim and simulated it.

5) Then I choose the Schmitt Trigger circuit to design, I choose Schmitt  trigger because they are widely used in signal conditioning applications to remove noise from signals.
   Then I researched the circuit and understood the working of it.

6) Then I designed the Schmitt Trigger circuit using eSim and generated the SPICE deck and replaced the eSim Mosfets with SKY130 technology. After that, I opened my spice deck
   using NGspice and got my desired waveforms.

Difficulties faced:

1) The HACKATHON team has instructed and guided us very well and the provided courses were very useful while designing the circuits they almost cleared all my doubts. So I didn't find any 
   difficulties in installing the eSim or while simulating the circuit.

2) While designing my circuit I didn't know the threshold voltage of SKY130 CMOS, So I asked my doubt in the slack channel and the team has cleared my doubt.


                                                            

