#Read Me

SINGLE STAGE OPEN-LOOP OP-AMP

--->WORKING WITH ESIM ,NGSPICE AND SKY130 MODELS

1.go to esim click on new project ,give name file will be saved then click on open
  schematic window
2.using place component ,place all necessary components for the circuit on to the
  schematic window.
4.annotate all the components using annotate option
3.connect all components using wire,Connect circuit without errors with 
  help of electrical rules check
4.generate netlist,in progress to get neccesary waveforms using ngspice
5.Add sky130 models by using its library which is available in sky130 folder 
  and edit netlist accordingly,the generated netlist is of type .cir
6.run the .cir file to get plots. 


--->TASK PERFORMANCE
1.Introduction to stages of esim marathon 
2.Followed Dac ip course provided by faculty
3.joined slack and took help from peers and sirs
4.researched about ngspice commands
5.analysed my circuit using reference circuit
4.debuged my circuit to get needed result
5.intense process, detailed observation
6.slack platform made perfect 